Hydrapak Hydrafusion Tube Kit

• Hot-weather hydration upgrade: Adds insulated protection to a compatible hydration reservoir to help keep drinking water cooler in high temperatures.
• Built-in foam insulation: Lightweight insulation is integrated directly into the drinking tube to reduce heat transfer from the surrounding air.
• Helps keep tube water cooler: Particularly useful when water sitting in an exposed standard drinking tube would otherwise warm quickly in hot conditions.
• Locking Comet bite valve: High-flow valve that self-seals after each sip and can be opened or locked with one hand.
• Protective dust cover: Helps protect the silicone Comet valve from collecting dust and dirt.
• Plug-N-Play quick disconnect: Allows the drinking tube to be disconnected quickly from a compatible reservoir.
• 91.4cm / 36in length: Provides useful length for routing from a rear reservoir towards the shoulder strap area.
• Replacement or upgrade: Can replace a compatible standard tube or add hot-weather insulation to an existing hydration system.

The HydraFusion Tube uses a 6mm / 1/4in drinking tube and HydraPak Plug-N-Play connection. Check that your reservoir uses a compatible Plug-N-Play connection before replacing or upgrading the existing hose.

The 91.4cm / 36in length allows the tube to be routed from the reservoir compartment towards the shoulder strap area of a compatible running pack.

If insulation is not required, the HydraPak HydraFlex Tube provides the lighter standard drinking-tube alternative at 51g.

For freezing-temperature protection rather than hot-weather insulation, the HydraPak ArcticFusion Insulated Tube Kit is the cold-weather upgrade designed to help prevent ice from blocking water flow.

For advice on hydration reservoirs, insulated tubes, valves and replacement components, see our Running Hydration Bladders & Reservoirs Guide.

If you are unsure whether the HydraFusion Tube is compatible with your reservoir or running pack, get in touch for straightforward advice.